Automatic noodle maker error
① to the wall of the rod machine on both sides, fixed under the rod angle, the gap will appear card rod.
② another is to the rod machine, continuous dry wheel, to see whether the same time to continue the bar, if there are different time to continue the bar will also lead to the phenomenon of the card bar.
③ See the rod machine to continue the strength is not the same, if not the same will produce the rod, you can give the rod machine on both sides of the fixed angle screws loosen, and adjust back.
④ There is also a situation noodle rod at both ends of the screw is not loose, such as loose or not at the same time will also appear in the bar.
⑤ Send Rod wheel Two whether the rod is sent out at the same time, if there is a failure to send out at the same time, first check the fixed feeding wheel screws are loose.
⑥ send out of the top angle from above the gap, there must be 2-3mm clearance, if the rod angle from the surface of the rod clearance too small will appear, forming a bar phenomenon.
If you need more detail about automatic noodle machine, please contact:
website: http://www.noodles-machine.com/product/noodle-machine1/automatic-fresh-noodle-making-machine.html
Email:sherry@machinehall.com
skype:live:machinehall.sale
phone/whatsapp:+8618539931566
Comments
Post a Comment